Transformations of iodine species inside elliptical channels of AlPO4‐11 crystals at low temperature: a Raman study

Raman spectra of iodine species confined in one‐dimensional elliptical channels of AlPO₄‐11 (AEL) crystals have been studied from room temperature down to −196 °C. As temperature decreases, thermal fluctuations of individual iodine molecules confined in AEL channels are slowed down and they prefer to rotate to channel axis direction, which increases the population of iodine molecules along channel axis (i.e., lying molecules and chains). Such temperature‐driven orientation transformation of iodine molecules is found to be reversible upon heating up to room temperature. The experimental observations are in good agreement with our theoretical simulations by molecular dynamics on low density iodine‐filled AEL crystals. We thus provide a new way to modulate the orientation of iodine molecules in nanochannels, which may have implications in low‐temperature‐sensitive nanoscale devices. Copyright © 2015 John Wiley & Sons, Ltd.     

Analysis of nano channel formation in quartz cubes by laser-induced process

A novel laser processing technique was developed for making channels in the nano regime in this paper. A Nd:YAG laser was used to dry fabricate micro channels (25μm～100μm di ameter) in a 1 cm^3 fused silica substrate by thermal-induced processing. By controlling the locations of these initiating micro channels on a silica cube, 1D-controllable self-connecting nano fractures can be formed as rectangular channels. These nano channels are smooth and with extremely high aspect ratio (～10^4 depth to width ratio). A possible mechanism is proposed to explain the formation of the nano channels. This laser-based nano channel fabrication technique is fast and inexpensive, and with potential applications in capillary electrophoresis and electro-osmosis driven nano-filtration.     

Efficient algorithms for three‐dimensional axial and planar random assignment problems

Beautiful formulas are known for the expected cost of random two‐dimensional assignment problems, but in higher dimensions even the scaling is not known. In three dimensions and above, the problem has natural “Axial” and “Planar” versions, both of which are NP‐hard. For 3‐dimensional Axial random assignment instances of size n, the cost scales as Ω(1/ n), and a main result of the present paper is a linear‐time algorithm that, with high probability, finds a solution of cost O(n^–1+o(1)). For 3‐dimensional Planar assignment, the lower bound is Ω(n), and we give a new efficient matching‐based algorithm that with high probability returns a solution with cost O(n log n). © 2013 Wiley Periodicals, Inc. Random Struct. Alg., 46, 160–196, 2015     

A new framework for implicit restarting of the Krylov–Schur algorithm

This paper introduces a new framework for implicit restarting of the Krylov–Schur algorithm. It is shown that restarting with arbitrary polynomial filter is possible by reassigning some of the eigenvalues of the Rayleigh quotient through a rank‐one correction, implemented using only the elementary transformations (translation and similarity) of the Krylov decomposition. This framework includes the implicitly restarted Arnoldi (IRA) algorithm and the Krylov–Schur algorithm with implicit harmonic restart as special cases. Further, it reveals that the IRA algorithm can be turned into an eigenvalue assignment method. Copyright © 2014 John Wiley & Sons, Ltd.     

Forwarding and optical indices of 4-regular circulant networks

An all-to-all routing in a graph G is a set of oriented paths of G, with exactly one path for each ordered pair of vertices. The load of an edge under an all-to-all routing R is the number of times it is used (in either direction) by paths of R, and the maximum load of an edge is denoted by $\pi (G,R)$. The edge-forwarding index $\pi (G)$ is the minimum of $\pi (G,R)$ over all possible all-to-all routings R, and the arc-forwarding index $\overrightarrow{\pi }(G)$ is defined similarly by taking direction into consideration, where an arc is an ordered pair of adjacent vertices. Denote by $w(G,R)$ the minimum number of colours required to colour the paths of R such that any two paths having an edge in common receive distinct colours. The optical index $w(G)$ is defined to be the minimum of $w(G,R)$ over all possible R, and the directed optical index $\overrightarrow{w}(G)$ is defined similarly by requiring that any two paths having an arc in common receive distinct colours. In this paper we obtain lower and upper bounds on these four invariants for 4-regular circulant graphs with connection set $\{\pm 1,\pm s\}$, $1<s<n/2$. We give approximation algorithms with performance ratio a small constant for the corresponding forwarding index and routing and wavelength assignment problems for some families of 4-regular circulant graphs.     

水声通信中基于信道辨识的盲turbo均衡方法

水声信道多途效应明显,造成接收信号存在严重的码间干扰(ISI,Intersymbol interference)。基于最小均方误差(MMSE,Minimum mean square error)准则的turbo均衡器级联了均衡和信道译码,能够有效去除ISI,并获得优良的性能。由于水声信道的时变性,传统MMSE-turbo均衡需要周期性的训练序列,以实现连续可靠的通信。训练序列虽然提高了通信的可靠性,但降低了信息的有效传输速率。因此,为提高通信效率,本文提出了一种盲turbo均衡方法,该方法通过引入新的盲信道辨识器来同时获得信道估计响应和已去除部分ISI的初步均衡输出信号,并为turbo均衡提供初始的响应参数和比特软信息。与水声通信中应用较多的盲判决反馈均衡器(DFE,Decision feedback equalizer)相比,海上实验结果证明本文提出的盲turbo均衡方法抗信道多途衰落的能力较强,并且与传统MMSE-turbo均衡相比无需训练序列,因此提高了信息的有效传输速率。     

基于MetropolisQ学习的蜂窝网络在线信道分配

针对现有的蜂窝网络的在线动态分配模型具有的信道需求量大、呼叫动态变化时阻塞率高和收敛速度慢的缺点,设计了一种基于MetropoisQ学习的蜂窝网络的在线信道分配方法。首先,在考虑同信道限制、邻居信道限制和同小区限制的基础上,设计了在线信道分配的数学模型,然后在Q-Learning算法基础上的设计了一种基于资格迹的Q(λ)算法实现信道的在线分配,为了进一步提高收敛速度,采用Metropois规则对算法中动作的选择方式进行改进,实现探索和利用的平衡。为了验证文中方法,采用Matlab工具上进行实验,仿真实验结果表明文中方法能实现蜂窝通信网络的在线信道分配,且与其它方法比较,具有较少的信道需求量、较低的阻塞率和收敛速度,较其它方法具有较大优越性。     

基于生命期模型的无线传感器网络信道分配博弈算法

针对无线传感器网络中节点因干扰过大导致重传能耗增加, 进而节点过早失效、网络生命期缩短的问题, 根据网络拓扑信息和路由信息设计节点的负载模型, 从而构建了节点的生命期模型. 然后利用博弈论将路径增益、交叉干扰和节点生命期等性能参数融入到效益函数中, 构建信道分配博弈模型. 理论分析证明该博弈模型存在纳什均衡. 进而运用最佳回应策略, 在所构建的信道分配博弈模型的基础上, 设计了一种优化网络生命期的抗干扰信道分配算法. 该算法使节点在选择信道时避免与网络中交叉干扰较大的节点和生命期较小的节点使用相同信道, 实现干扰小、能耗低且均衡的信道选择. 理论分析与仿真结果证明该算法最终能够快速地收敛到纳什均衡, 且具有较小的信息复杂度, 从而减小算法本身的通信能耗. 同时, 该算法具有良好的抗干扰性和信道均衡性, 能够有效地延长网络生命期.     

A novel nanoscale fin field effect transistor by amended channel: Investigation and fundamental physics

The present paper proposes a new Fin Field Effect Transistor (FinFET) with an amended Channel (AC). The fin region consists of two sections; the lower part which has a rounded shape and the upper part of fin as conventional FinFETs, is cubic. The AC-FinFET devices are proven to have a lower threshold voltage roll-off, reduced DIBL, better subthreshold slope characteristics, and a better gate capacitance in comparison with the C-FinFET. Moreover, the simulation result with three-dimensional and two-carrier device simulator demonstrates an improved output characteristic of the proposed structure due to reduction of self-heating effect. Due to the rounded shape of the lower fin region and decreasing corner effects there, the heat can flow easily, and the device temperature will decrease. Also the gate control over the channel increases due to the narrow upper part of the fin. The paper, thus, attempts to show the advantages of higher performance AC-FinFET device over the conventional one, and its effect on the operation of nanoscale devices.     

Polycaprolactone solution–based ink for designing microfluidic channels on paper via 3D printing platform for biosensing application

This work reports a novel fabrication technique for development of channels on paper‐based microfluidic devices using the syringe module of a 3D printing syringe–based system. In this study, printing using polycaprolactone (PCL)‐based ink (Mw 70 000‐90 000) was employed for the generation of functional hydrophobic barriers on Whatman qualitative filter paper grade 1 (approximate thickness of 180 μm and pore diameter of 11 μm), which would effectively channelize fluid flow to multiple assay zones dedicated for different analyte detection on a microfluidic paper‐based analytical device (μPAD). The standardization studies reveal that a functional hydrophilic channel for sample conduction fabricated using the reported technique can be as narrow as 460.7 ± 20 μm and a functional hydrophobic barrier can be of any width with a lower limit of about 982.2 ± 142.75 μm when a minimum number of two layers of the ink is extruded onto paper. A comparison with the hydrodynamic model established for writing with ink is used to explain the width of the line printed by this system. A fluid flow analysis through a single channel system was also carried out to establish its conformity with the Washburn model, which governs the fluid flow in two‐dimensional μPAD. The presented fabrication technique proves to be a robust strategy that effectively taps the advantages of this 3D printing technique in the production of μPADs with enhanced speed and reproducibility.